New Equalize 2 – now with two filters: with a general gain slope and a bandwidth corrector.
Acon Digital Equalize is a parametric equalizer plugin that combines unique features with a great workflow and intuitive user interface. Unlike other equalizers, you can freely adjust not only the center frequency, gain and bandwidth, but also the filter slope for each band. The filter slope can be set from 3 dB to an ultra-sharp 120 dB per octave.
Needless to say, you can use Equalize as a zero latency plugin when using minimum phase mode, or choose to keep phase relationships in linear phase mode. Equalize takes it one step further, however, and introduces a unique mixed phase mode that allows you to set the delay freely between 5 and 120 milliseconds while maintaining phase relationships as much as possible. This gives you unique control over potential pre-sonic artifacts, which is a common problem with linear phase filtering. Band parameters can be adjusted using knobs directly in the frequency response graph, including bandwidth and filter slope. A flexible real-time analyzer allows you to monitor every aspect of processing You can easily switch between full, middle, side, left, or right channel processing for each band, and Equalize automatically routes the audio signal internally for the best results and lowest latency possible.
Highlights
- Eight different band filter types — low cut, low shelf, peak, tilt, bandpass, notch, high shelf and high cut
- Up to twelve independent bands
- Freely adjustable gain, frequency, bandwidth, resonance and filter slope
- Three different phase modes, including the novel mixed phase mode with adjustable latency
- Choose channel mode for each band independently (mid, side, left, right or full processing)
Acon Digital Equalize 2 is available as VST, VST3 or AAX for both Windows and Mac or as AU plug-ins for Mac. There are 32 and 64 bit versions for Windows. The Mac version is 64 bit and runs natively on both ARM (such as Apple M1) and Intel processors.
New in Acon Digital Equalize 2
The new version of Equalize includes two new filter types – tilt and bandpass. It now offers a total of eight different filter types. Just like the previously available filters, both the tilt and bandpass filters offer the unique continuously adjustable filter slopes in the range 3 to 120 dB per octave.
The frequency range of the equalizer curve can now be altered conveniently by dragging the edges of the frequency axis or moved by clicking and dragging the center. This makes it possible to zoom in on specific frequency ranges for more precise control. A new preferences page offer user settings such as analyzer resolution and user interface language. Another new feature is the optional piano keyboard display above the frequency axis. Band frequencies can easily be set to match a tone’s frequency by clicking the key on the piano keyboard.
New Features at a Glance :
- Two new filter types — tilt and bandpass filters
- Adjustable frequency range in the equalizer curve editor
- Optional piano keyboard display
- EUCON and full Pro Tools HW controller support
- New preferences page with spectrum analyzer, tooltip, language and piano roll settings
- Spectrum analyzer with adjustable frequency tilt
Platforms and Plug-in Formats :
- Available as VST, VST3 or AAX plug-ins on PC (Windows)
- Available as VST, VST3, AAX or AU plug-ins on Apple Macintosh (OS X)
- Native 32 bit or 64 bit versions of all plug-ins are available
- Supports sampling rates up to 96 kHz
- Supports multi-channel formats such as 5.1 and 7.1 surround
Acon Digital Equalize Features :
- Up to twelve equalizer bands
- Eight different band filter types (low cut, low shelf, peak, tilt, bandpass, notch, high shelf and high cut)
- Band frequency, gain, bandwidth, resonance and filter slope is freely adjustable for each band
- Three different filter modes, minimum phase, linear phase or the novel mixed phase
- Adjustable latency and pre-ringing time in mixed phase mode
- Zero latency in minimum phase mode
- Channel mode (mid, side, left, right or full processing) can be set independently for each band
- Multiple selection of bands
- Resizable graphical user interface
- Solo and bypass modes
- Optional automatic make-up gain
- Optional gain to bandwidth linking
- Two spectrum analyzers that can analyze the input or output signal from the mid, side, left or right channel
- Graphical visualization of the equalizer frequency response
- Preset manager and a large number of factory presets
- Save, load and categorize user presets
System Requirements :
PC Version (Windows)
- Windows 10 / 8 / 7
- Intel Core i3 or AMD multi-core processor (Intel Core i5 or faster recommended)
- 1366 x 768 display resolution (1920 x 1080 or higher recommended)
- 1 GB RAM (4 GB or more recommended)
- 1 GB free HD space
- A host application that is compatible with VST, VST3 or AAX (Pro Tools 10.3.5 or higher)
Macintosh Version (macOS)
- OS X 10.9 or later
- Runs natively on ARM64 and Intel
- 1 GB RAM (4 GB or more recommended)
- 1 GB free HD space
- A host application that is compatible with AU, VST, VST3 or AAX (Pro Tools 11 or higher)
File Information :
| Name | : Acon Digital Equalize 2 |
| Version | : 2.1.1 |
| Size | : 41.83null MB |
| Format | : VST, VST3, AAX, AU |
| Bit Depth | : 32 Bit / 64 Bit |
| Developer | : Acon Digital |
| Language | : English |
| License | : ShareWare |
| Key | : No Password |
List File
Acon Digital Equalize 2 v2.1.1 Incl Keygen-R2R
+---MAC
| Equalize2_en.pdf
| Equalize_macOS_2_1_1.pkg
| More Plugins.url
|
+---R2R.WIN.MAC
| AconDigital_KeyGen.exe
| More Plugins.url
|
\---WIN
| Equalize_Win32_2_1_1.exe
| Equalize_Win64_2_1_1.exe
| More Plugins.url
Tags : Free Download Acon Digital Equalize 2 v2.1.1 Full version, Download gratis Acon Digital Equalize 2 v2.1.1 Full Version, Plugin For Windows, Audio Editor, Software Full Version, Download For Windows,Download for MacOS,AAX Plugins,AU Plugins,VST Plugins,VST3 Plugins,32 Bit,64 Bit,Acon Digital,MacOS,Windows,Audio Plugins,Plugins,
0 Komentar